To comply with Etsy Marketplace Integrity rules, All props that could be mistaken for a real firearm will now have either a permanent blaze orange tip or blaze orange marking near the cannon end.
Please, be sure to check your own country rules regarding prop replicas ownership and rules about removing/repainting the orange tip (removing the orange tip/marking can be illegal in some country)
——————————
Here’s a 1:1 3D-Printed fan-art inspired version of the famous M97 Viper from the Sci Fi Trilogy Mass Effect
Available in a raw 3d printed kit or fully finished and assembled
Time to make: between 2-4 weeks depending on current order queue
The replica weighs around 1,3kg and its lenght is 1 meter long (3.28 feet)
It is separated in two parts for easier transport. Locked with a M6 screw on the bottom side.
More pics here: https://www.facebook.com/pg/StarJeff3d/photos/?tab=album&album_id=1620862321365534
—————————————————————————————————–
For Raw 3D Printed kits:
Perfect for people on a budget or people wanting to assemble and paint it themselves.
Printed on a high quality 3D Printer Ultimaker 2 with high quality FormFutura PLA with a standard resolution of 0.1mm (100 microns) or 0.15mm (150 microns) for really big parts to get the best result possible with a respectable leadtime.
Parts are raw from the printer, meaning some clean-up is required (removing support, brims) but don’t worry! I always design the parts with little to no support to ease up this process.
Printed in silver or black, depending on what I have at the moment. Can be printed in custom colors this will change the deadline and a small fee will be added (to be discussed in PM for more info)
3D Printed items can be glued with super glue (cyanoacrylate) but I recommend epoxy glue. Pegs included for easy and accurate assembly.
For fully finished props:
Sold fully painted and assembled.
This props is perfect for cosplayers and/or collectors.
It was modeled, printed and painted by myself
It does not fire anything. The trigger is fixed
It is made of around 26 different parts and assembled with assembly pins and hard glue..
The replica is made of PLA, some parts may be made of ABS depending on the filament i have at the time.
It’s painted with an airbrush and acrylic paint. A coat of varnish is applied to maximize paint protection.
If you have any questions, feel free to ask by private message or e-mail me atstarjeff3d [!at] gmail.com
Intellectual property belongs to EA
Original design by Bioware
Recast not allowed
Reviews
There are no reviews yet.