Ghostbusters Spirit or Walmart Trap – Plug and play Bar Graph light upgrade kit

NOTE: THIS IS NOT A FULL GHOST TRAP – THIS IS ONLY ASSEMBLY HARDWARE AND PARTS TO UPGRADE THE BAR GRAPH ON A SPIRIT OR WALMART HALLOWEEN TRAP. YOU SUPPLY THE TRAP.

This is an optional plug and play upgrade kit to make the bar graph on your Spirit ghost trap much closer to screen accurate with an animated display that triggers in sync with trap door functions. See
a video of the full animation cycle here:

https://www.dropbox.com/scl/fi/nco4t4tnqmz973dzm7prn/IMG_0709.MOV?rlkey=b8rwdcoex80tnct2lie0n2e77&dl=0

Electronics come pre-assembled and ready to go using the existing motherboard and power source in your trap. To install, just open your trap slide in the new assembly and plug it all in to the existing motherboard inside the trap. Then with a little bit of drilling and the included screws, add the finishing plate to complete the look!

The 10 segment LED is available in your choice of yellow, amber, green, blue or red. Parts made of PLA Plastic and small electronic parts. The default color for the LED to the right of the 10 segment bar graph is red, but yellow is also available upon request.

You will receive a physical version of this product including all parts shown; NOT a 3D model file. 3D printed parts are shipped with minimal cleanup but the finishing plate can be filled and painted for an additional $5. Increased shipping times may apply to painted parts.

Please check your trap for compatibility before you order. If your trap has large door gears (7mm vs about 4mm – see image) the motherboard in that revision is not compatible with this kit.

Note: Color of wiring and child circuit board varies. Please be sure to select the correct trap version at checkout as the wiring differs slightly between trap versions. If you don’t get the right cable for your trap, the board will not light.